Ubiquity litebeam 5AC Gen 2 receiver assembly

How to Assemble the Ubiquiti LiteBeam 5AC Gen 2 Receiver

Assembling the Ubiquiti LiteBeam 5AC Gen 2 receiver is a straightforward process that can greatly enhance your wireless network. Here’s a quick guide to get you started:

1. Unbox the Device: Carefully open the package and check all the components, including the antenna, mounting hardware, and cables.

2. Attach the Mount: Secure the ball joint mount to the rear housing using the provided screws.

3. Insert the Antenna Feed: Place the antenna feed into the rear housing and fasten it with a screw.

4. Attach the Feed Horn: Connect the feed horn to the antenna feed and lock it in place with a snap ring.

5. Connect Ethernet Cable: Plug the Ethernet cable into the port on the antenna feed and secure it with a cable tie.

6. Mount the Device: Use the metal straps to mount the device on a pole and adjust the alignment for optimal signal strength.

7. Power Up: Connect the other end of the Ethernet cable to a power injector and a power source.

With these simple steps, your Ubiquiti LiteBeam 5AC Gen 2 receiver will be up and running, providing reliable wireless connectivity.

For a detailed visual guide, check out our YouTube video:  How to Assemble Ubiquiti LiteBeam 5AC Gen 2.